Company philosophysaving, efficient, harmonious and pragmatic
PRODUCT  service
Product menu
YC-905 series of drum automatic aging machine
    Publish time 2019-07-23 15:18    

一, The equipment profile

YC-905 series of drum automatic aging machine - is our company for the lead-type aluminum electrolytic capacitor developed by a set of automatic step-up aging, testing and sorting as one of the aging test equipment; the device using automatic preset boost Mode to automatically boost the high temperature aging, and to fully mechanized operation design, breaking the traditional aging equipment to be equipped with compressed air to run the limitations of the use of my company's latest research and development of the fifth generation of mechanical feed, to ensure that the machine feeding rate And the stability of the equipment, simple Chinese operation interface and a strong industrial control system, so that data collection, analysis is more simple and convenient, effectively improve the production efficiency and reduce unnecessary waste and labor costs.
1, the aging temperature: in the room temperature to 105 ℃ within the free set;
2, the device weight about 2500KG;
3, equipment size (area): 3600 (L) × 3000 (W) × 2100 (H) mm;
4, the total power of about 10KW equipment, the normal production of the average operating power ≤ 6KW

二, The scope of adaptation:

Equipment model

Product shell number

Aluminum height

Production voltage

The number of racks

Number of clamps

Number of products carried

Thickness of partition

Aging power supply






90 only

14400 only

1.8 mm

8 segment






75 only

12000 only

2.4 mm

8 segment






60 only

9600 only

2.4 mm

8 segment

1, the capacity test range: 0.01μF ~ 10000μF; test accuracy: ± 1%;
2, the loss angle: 0.001-0.999, the test accuracy: ± 1.0% ± 1 word;
3, capacity test frequency: 120Hz, 1KHz (2 kinds) can be set alone;
4, leakage current test range: 0.005μA-9999μA, test accuracy: ± 1% ± 0.2μA, two leakage test;
5, ESR test range: 0.01mΩ-999kΩ, test accuracy of ± 1.0%, ESR test frequency: 1K / 10K / 20K / 100K Hz can be set alone;

三, the working principle:
1, the product guide needle shaping and do polarity detection, open circuit, short circuit and reverse polarity detection; exclude open circuit, bending feet, short circuit and reverse pole products;
2, the product into the oven for high temperature by the linear power supply charging aging;
3, the product after the discharge cooling, the aging product is not detected, will exclude the aging products;
4, the product after discharge capacity and loss of the angle test;
5, the product after the discharge by the "ESR" test (this feature matching);
 6, the product recharging about 40 seconds after the leakage current test;
7, the test results are: high impedance, high capacity, low capacity, high loss, leakage large, good products, re-seized goods;
8, the machine using standard instrumentation test, which can effectively improve the accuracy of the parameters;
9, equipment with data acquisition function;
10, remote access to the relevant parameters of the machine, with the company "ERP" system docking;
11, the device uses the latest generation of transport folder, which can effectively guarantee the service life;

, the equipment performance:

Aging time


90 Min / 160 S

100 Min / 144 S

110 Min / 130 S

120 Min / 120 S

130 Min / 110 S

140 Min / 102 S

170 Min / 85 S



80 Min / 140 S

90 Min / 133 S

100 Min / 120 S

110 Min / 109 S

120 Min / 100 S

140 Min / 85 S

160 Min / 75 S



70 Min / 137 S

80 Min / 120 S

90 Min / 106 S

100 Min / 96 S

110 Min / 87 S

130 Min / 73 S

150 Min / 64 S


1, the number of incoming and outgoing materials for the "test run" the actual number of minutes per minute, the error within ± 2;
     2, the user can according to their own characteristics of the product stalls to select the product to ensure that the aging effect.
     3, leakage test power and charging power and not aging Charging power and test power are used to establish an independent way to effectively ensure the accuracy of product testing.

五, the use of environmental conditions:

     1, using three-phase five-wire AC380V ± 5% 50Hz / 10KVA power supply;
     2, the use of ambient temperature: room temperature;
     3, the characteristics of the guarantee range: 23 ± 5 ℃, 45 ~ 75% RH;

Contact us
About us
XML 地图 | Sitemap 地图